Vba20A Vba40A Vba10A-02gn Air Operated Pressure Booster Regulator with Air Tank Gauge Silencer for Pneumatic Automation System

Product Description

Vba20A Vba40A Vba10A-02gn Air Operated Pressure Booster Regulator with Air Tank Gauge Silencer for Pneumatic automation System

 

The specialty regulator series VBA is a booster regulator that saves money and energy by increasing the main line pressure up to two times. The booster regulator, when connected to air supply line, increases pressure up to two times and the main air supply pressure may be set low. Desired pressure increase can be easily adjusted.

Product Feature

1. Easy adjustment of output pressure.

2. Boosts local line pressure without requiring additional power.

3. Possible to get a maximum of double pressure by connecting air with a factory line. (VBA11A: maximum 4 times)

4. Space-saving type that directly connects air tanks and booster regulators.

 

 

Main Products
Our main products cover air source treatments (regulator, precision regulator, filter, lubricator, filter & regulator, and F.R.L combination), solenoid valve, pneumatic fittings and other accessories etc. 

 

Product Description

 

 

Model	VBA10A- 02	VBA20A- 03	VBA40A- 04	VBA22A- 03	VBA42A- 04	VBA43A- 04	VBA11A- 02
Working medium	Compressed air
Pressure increase ratio	Twice						2 to 4 times*^4)
Pressure adjustment mechanism	Knob-operated with relief mechanism*^2)			Air-operated	Knob-operated with relief mechanism^*2)
Max.flow rate^*3)[L/min (ANR)]	230	1000	1900	1000	1900	1600	70
Set pressure range (Mpa)	0.2 to 2.0	0.2 to 1.0				0.2 to 1.6	0.4 to 2.0
Supply pressure range (Mpa)	0.1 to 1.0
Proof pressure(Mpa)	3	1.5				2.4	3
Port size (RC)(IN/OUT: 2 locations)	1/4	3/8	1/2	3/8	1/2		1/4
Pressure gauge port size (Rc)  (IN/OUT: 2 locations)	1/8
Tank connection port(with plug)^*5)	1/4	3/8	1/2	3/8	1/2		1/4
Ambient and fluid temperature (ºC)	2 to 50(NO freezing)
Installation	Horizontal
Lubrication	Grease(Non-lube)
Weight (kg)	0.84	3.9	8.6	3.9	8.6	8.6	0.89

*1) Be sure to secure an air supply capacity of the minimum operating pressure (0.1 MPa) or more. 

*2) If the OUT pressure is higher than the set pressure by the knob, excess pressure is exhausted from the back of the knob. 

*3) Flow rate at IN= OUT= 0.5 MPa. The pressure varies depending on the operating conditions. Refer to "Flow Rate Characteristics" .

*4) Set the pressure increase ratio to 2 or more. 

*5) The tank connection port cannot be used for applications other than the connection with VBAT.

 

Internal Structure

 

Solid line: Operating range 

                   Operate so that the flow rate follows the solid line even when the outlet side air has been consumed. 

                    Ex.) For the VBA10A: When the inlet pressure is 0.5 MPa and the set pressure is 1.0 MPa,   operate at an outlet air flflow rate of 180 L/min (ANR) or less. 

Dotted line: Outside of the set pressure range 

P1: Inlet pressure           P2: Outlet pressure

* When operated at a flow rate that falls within the unstable area (P2 < P1 conditions) as shown in the graphs above, the booster   regulator may not operate normally and may therefore fail to increase the pressure. 

Tank Pressure Pulsation

Pulsation is decreased with a tank. If the outlet capacity is undersized, pulsation may occur. 

Conditions 

Inlet pressure: 0.5 MPa 

Outlet set pressure: 1 MPa  

Flow rate: Between 0 and max. flow rate 

 

Performance of air tank 

1. Alleviates the pulsation generated on the  outlet side.  

2. When air consumption exceeds air supply  during intermittent operation, required air  will be accumulated in the tank for use. 

3. This does not apply for continuous  operation. 

4. Operation at a flow rate that falls within the unstable area under temporary P1 ≥ P2 conditions can be prevented when the  outlet side air has been consumed. 

Internal Structure

 

Hot Sales&Recommended Product

 

 

 

Applications

Industrial production: used to purify the air in production workshops and ensure product quality.
Automation equipment: robots, automatic assembly lines etc.
Mechanical equipment: machine tools, packaging machinery etc.
Food industry: filling equipment, packaging equipment etc.
Medical and health care: used to purify the air in operating rooms, wards and other places.
Electronic industry: used to purify the air in dust-free workshops and ensure the cleanliness of products.
Textile machinery: looms, dyeing and finishing equipment etc.
Packaging machinery: filling machines, sealing machines etc.

Production Process

Packaging & Shipping

 

Certifications

 

Our Team

 

 

 

FAQ

 

Q1:Are you a manufacturer or trading company?
A: We are a professional pneumatic components manufacturer, we have our own factory and marketing department, technical team and R&D department.

Q2: How do you ensure your product and service quality?
A: Provide customers with "high precision, high efficiency, high-quality" products is our mission. Every product is carefully tested before packing and shipping. Our team is always here for you to contact and discuss, any questions, just feel free to let us know.

Q3: What is your sample policy?
A: We can offer some models sample for free, it depends on the product type, but the freight cost should be paid by you, pls contact us to talk about the sample.

Q4: How can l make payment?
A: We accept T/T bank transfer, Western Union, L/C, Paypal etc.

Q5: What is your minimum order quantity?
A: All MOQ depends on the product. Please feel free to check with us for specific items.

Q6: What about delivery time?
A: It depends on the product and quantities, generally speaking, it takes about 2 to 4 weeks.

Q7: Do you accept OEM business?
A: Sure. We can do OEM, we already OEM for many domestic and international customers.

Q8: What about shipping?
A: We recommend to ship small batch by air or express, and bulk order by sea.

Q9: What's your company policy to be your distributor?
A: We have different distributor policies for different market, please don't hesitate to contact us for detailed discussion. And we welcome you visit our factory and to talk face to face.